A maintenance checklist for businesses
With the weather turning colder in what feels like a sudden change, many people in charge of facilities and operations are naturally starting to think about whether their premises’ HVAC system is prepared.
You see, as the weather gets colder, your heating, ventilation and air conditioning systems have to work harder and for longer. If a service has been missed or a fault has been put off, winter is often the time when the consequences of that arise.
The good news is, it’s not too late to prepare and try and prevent any serious failings. So whether you manage an office, school, shop, warehouse or another commercial property, this guide will help you understand what check before winter is in full force, how to get ahead, and when to ask an engineer for help.
Commercial HVAC Winter Checklist
Review your service records and any outstanding recommendations.
Test heating before you need it every day.
Check timers, temperature settings and building operating hours.
Note rooms that are slow to warm up or feel colder than others.
Look for unusual noises, leaks or recurring fault codes.
Check that accessible vents and outdoor units aren’t obstructed.
Plan maintenance or repairs around your building’s use.
Safety Information - Your checks should stay within what you can safely access and operate. Leave work involving electrical components, gas equipment, refrigerant and internal system components to appropriately qualified engineers.
Check when your HVAC system was last serviced
Just because you’re responsible for a building, you might not know off the top of your head when each piece of equipment was last inspected, particularly if you’ve inherited the premises or manage several sites.
A good place to start is by checking your internal facilities log (which is recommended to have), or another service records log. You should verify:
When the heating, air conditioning and ventilation equipment was last serviced.
Whether any maintenance or repairs were recommended but not completed.
Whether the same faults have been reported more than once.
When the next service is due under your maintenance arrangement.
If you don’t have the records to hand, you can ask your existing maintenance provider if you have one or look back through your emails/documents for correspondence.
TIP – We strongly advise keeping a central log of your systems, the provider, when they were last serviced and when the next service is due. This helps not only keep you organised, but compliant too.
There isn’t one service schedule that suits every commercial HVAC system. The right frequency depends on the equipment, manufacturer’s guidance, how heavily it’s used and any applicable requirements.
If your system is overdue a service, arranging one before temperatures drop gives you more time to deal with any issues found.
Test your heating before the first cold spell
Don’t wait until the building feels cold to find out whether the heating is working as it should.
When you first switch to winter operation, check whether the system responds as expected and whether occupied areas reach a comfortable temperature. Ask employees or other people using your building if any spaces are regularly too cold, too warm or slow to heat up.
Things that could signal an issue:
Rooms that are colder than the rest of the building.
Heating that takes longer than usual to reach temperature.
Equipment that starts and stops repeatedly.
Fault codes or warning messages.
Unusual noises or visible leaks.
These symptoms don’t always mean you need new equipment. Sometimes the issue relates to controls, maintenance or a component that can be repaired. An engineer can investigate the cause and advise on the next step.
Check your heating controls and schedules
Your HVAC system needs to reflect how your building is actually used. If opening hours, shift patterns or occupancy have changed since the controls were set, the system may be heating empty areas or starting too late for people arriving.
Things to check in system permissions allow:
Do the operating times match your current opening hours?
Are different areas heated when they’re needed?
Are holiday and weekend schedules up to date?
Are temperature settings consistent with how each space is used?
Are heating and cooling operating against each other in the same area?
If you have a building management system, review any overrides or old schedules with the person responsible for it. Temporary changes made during a previous season may still be in place.
TIP: Be careful with broad changes across a building: offices, storage areas and spaces used for particular activities may have different needs. If you’re unsure how your system is configured, ask your maintenance provider to review it with you.
Look at vents, filters and outdoor units
Your system needs appropriate airflow to operate as intended. Before winter, look for obvious obstructions around accessible equipment.
Follow the manufacturer’s instructions and your site procedures. Don’t remove covers or attempt to clean internal components unless you’re authorised and trained to do so.
Filters, coils, fans and drainage may all form part of a professional service, depending on the equipment. If airflow feels weak or a room remains stuffy, ask an engineer to investigate rather than assuming the filter is the only cause.
Keep ventilation in mind during colder weather
It’s tempting to focus entirely on keeping heat in, but your building still needs suitable ventilation. That’s particularly relevant in occupied spaces such as classrooms, offices, hospitality venues and healthcare settings.
Don’t block fresh-air inlets to stop draughts. If ventilation is making an area uncomfortable, an engineer can look at the system and how air is supplied. The Health and Safety Executive provides guidance on balancing ventilation with a comfortable temperature.
Don’t forget air conditioning used for heating
If your building uses air conditioning for heating as well as cooling, include it in your winter checks. Test the heating mode and note whether the system warms the space as expected. Report recurring fault codes, poor airflow, leaks or a noticeable change in performance.
Outdoor heat-pump units may run a defrost cycle in cold weather. Depending on the system, you might notice a temporary change in operation or visible vapour. That can be normal. Persistent icing, repeated faults or poor heating performance should be checked by an engineer.
Know what a professional HVAC service may include
A pre-winter service gives an engineer an opportunity to assess the equipment before it’s relied on more heavily.
The exact work depends on your system, its condition and the agreed service.
A typical service would generally include:
Checking heating and cooling operation.
Inspecting accessible components for wear or damage.
Checking controls, settings and operating schedules.
Inspecting filters, coils, fans and drainage where relevant.
Identifying faults or maintenance that needs attention.
Discussing any recommended repairs or further investigations.
For gas heating equipment, work should be carried out by an engineer who is appropriately qualified and registered for the appliance and work involved.
A service should leave you with a clearer picture of what has been checked, what needs attention and whether any further work should be planned.
A service and a statutory inspection are not necessarily the same thing. For example, in England and Wales, certain air conditioning systems with an effective rated output over 12 kW require a separate energy inspection by an accredited assessor at intervals of no more than five years. Check the government’s air conditioning inspection guidance if you’re unsure whether it applies to your building.
Deal with known faults before they become more disruptive
It’s easy to put off a fault when equipment is still running. But a system that works intermittently, heats some rooms better than others or repeatedly displays an error code can become more disruptive when demand increases.
What warrants contacting an engineer?
Heating that isn’t working or is unreliable.
Air conditioning that isn’t heating properly.
Repeated shutdowns or fault codes.
Unusual noises, smells or water leaks.
A change in performance that you can’t explain.
When you get in touch, it helps to have the equipment details, the affected location, any fault code and a description of when the problem occurs. Previous service records can also be useful.
If you suspect a gas leak, follow your site’s emergency procedure. For natural gas, call the National Gas Emergency Service on 0800 111 999 immediately. HSE provides gas safety guidance for employers, including what to do if you suspect a leak.
Review energy use and running costs
Colder weather usually means a change in heating demand, so a higher winter bill doesn’t automatically point to a fault. But if costs have risen unexpectedly, or the building isn’t comfortable despite equipment running for long periods, it’s worth looking more closely.
Start with the things you can identify:
Compare bills or meter readings with previous periods, taking account of weather, opening hours and energy prices.
Check whether the building’s operating hours have changed.
Ask whether particular rooms are consistently too hot or too cold.
Review whether maintenance is up to date.
Note equipment that is frequently overridden or adjusted manually.
The solution might be a change to controls, a repair or planned maintenance. In other cases, an upgrade may be worth considering. The right approach depends on the system and the building; there’s no fixed saving that applies to every site.
Decide whether to repair or replace older equipment
Older HVAC equipment doesn’t automatically need replacing. If it’s maintained, reliable and still suitable for the building, a repair may be the sensible option.
However, it may be time to discuss an upgrade the same faults keep returning, repairs are becoming more frequent, or replacement parts are difficult to obtain.
An engineer can help you compare the condition and repair history of the existing system with the practicalities of upgrading. That discussion should include the work involved, likely disruption and how the equipment will be maintained.
What should you do if your commercial heating breaks down?
First, record what has happened and which areas are affected. Check for a displayed fault code and let the person responsible for the building know.
If you have a maintenance contract, check the contact details and call-out arrangements. Give the engineer as much information as you can: the equipment type, symptoms, any warning messages and whether the issue affects the whole building or one area.
Avoid repeatedly resetting equipment or attempting repairs unless your site procedure and the manufacturer’s guidance say it’s appropriate. If you suspect a gas leak, follow the emergency steps above.
It’s also worth deciding in advance how your business will respond if heating fails. For example, who will contact the maintenance provider, how affected areas will be managed and what access an engineer will need.
If you’re an existing Compac customer, you can reach out to us 24/7 to report a problem and request an engineer to visit.

